RACING SIMULATOR - PVC

Finally finished my first attempt at building a racing sim rig using PVC pipe . Using SIMUL8R's original design, I made a few small design changes.



Mainly wider to accomodate the seat size and slightly shorter because of limited space.



PVC pipe used - 50mm Class 12 High Pressure pipe. As it was difficult to glue some sections (Glue sets in 5 sec) drilled and screwed most sections, this was an advantage as i can disassemble a lot easier if required to move the unit.




Purchased a seat from the local car wrecking yard, pulled one out of a Mazda 323, quite comfortable with recliner, forward and back and height adjuster.